Hallo,

Ich habe NGW100 und CAM-c3188a.
Ich habe neue Kernel 2.6.25.10.atmel.2 auf dem Board kopiert.

Ich habe endlich /dev/video0 und /dev/video1 auf dem Board, nachdem ich die gebrauchten modules geladen habe.

Aber es gibt noch Fehlermeldung:
Failed to open video device: No such device
als ich das Programm capture laufen lasse:
http://www.avr32linux.org/twiki/bin/...AtmelIsiDriver

Patching habe ich auch schon gemacht.

Hier sind lsmod und dmesg von Board:

lsmod:

Module Size Used by Not tainted
i2c_gpio 2336 0
i2c_algo_bit 4676 1 i2c_gpio
i2c_dev 4740 0
ovcamchip 15208 0
v4l2_common 8800 0
i2c_core 16176 5 i2c_gpio,i2c_algo_bit,i2c_dev,ovcamchip,v4l2_com
mon
v4l2_int_device 2080 0
compat_ioctl32 992 0
atmel_isi 13956 0
videodev 25824 1 atmel_isi
v4l1_compat 10212 1 videodev
xt_state 1888 1
iptable_filter 2432 1
ipt_MASQUERADE 2368 1
iptable_nat 4936 1
nf_nat 12758 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 11304 4 iptable_nat,nf_nat
nf_conntrack 42320 5 xt_state,ipt_MASQUERADE,iptable_nat,nf_nat,nf_co
nntrack_ipv4
ip_tables 8208 2 iptable_filter,iptable_nat
vfat 8480 0
fat 35868 1 vfat
nls_base 5696 2 vfat,fat

dmesg:

Linux video capture interface: v2.00
atmel_isi: fbd at 11cf5008 video buffer at phys addr 10c00000
atmel_isi: fbd at 11cf5030 video buffer at phys addr 10c40000
atmel_isi: fbd at 11cf5058 video buffer at phys addr 10c80000
atmel_isi: fbd at 11cf5080 video buffer at phys addr 10cc0000
atmel_isi atmel_isi.0: capture buffer: 962560 bytes at b1f00000 (phys 0x11f00000)
atmel_isi atmel_isi.0: Atmel ISI V4L2 device at 0xfff02c00
ovcamchip: v2.27 for Linux 2.6 : OV camera chip I2C driver

I2C /dev entries driver
i2c-gpio i2c-gpio.0: using pins 6 (SDA) and 7 (SCL)
atmel_isi_capture: opened

Vielen Dank.

Gruss