Hallo Leute ich hab hier ein Display von Pollin LCD-Modul TG12864B-03
Datenblatt: http://www.pollin.de/shop/downloads/D120424D.PDF

Dies wollte ich mit dem Beispielcode aus dem Bascom Studio ansteuern
Code:
'-----------------------------------------------------------------------------------------
'name                     : ks108.bas
'copyright                : (c) 1995-2005, MCS Electronics
'purpose                  : demonstrates the KS108 based graphical display support
'micro                    : Mega323
'suited for demo          : no
'commercial addon needed  : no
'-----------------------------------------------------------------------------------------

$regfile = "m323def.dat"                                    ' specify the used micro
$crystal = 8000000                                          ' used crystal frequency
$baud = 60000                                               ' use baud rate
$hwstack = 32                                               ' default use 32 for the hardware stack
$swstack = 10                                               ' default use 10 for the SW stack
$framesize = 40                                             ' default use 40 for the frame space


'some routines to control the display are in the glcdKS108.lib file
$lib "glcdKS108.lbX"


Wait 2

Print "Config"                                              ' printing will still work as only the receiver pin is disabled


'First we define that we use a graphic LCD
Config Graphlcd = 128 * 64sed , Dataport = Porta , Controlport = Portc , Ce = 0 , Ce2 = 1 , Cd = 4 , Rd = 3 , Reset = 2 , Enable = 5

'The dataport is the portname that is connected to the data lines of the LCD
'The controlport is the portname which pins are used to control the lcd
'CE =CS1  Chip select
'CE2=CS2  Chip select second chip
'CD=Data/instruction
'RD=Read
'RESET = reset
'ENABLE= Chip Enable



'Dim variables (y not used)
Dim X As Byte , Y As Byte



Print "Cls"
Cls

Wait 1

'specify the font we want to use
Setfont Font8x8


'You can use locate but the columns have a range from 1-128
'When you want to show somthing on the LCD, use the LDAT command
'LCDAT Y , COL, value
Lcdat 1 , 1 , "123"

'lcdat accepts an additional param for inversing the text
Lcdat 2 , 1 , "123" , 1                                     ' will inverse the text

'Now use a different font
'Setfont Font8x8
'since the 16*16 font uses 2 rows, show on row 3
'Lcdat 1 , 1 , "2345"
'Lcdat 2 , 56 , "2345656"
Wait 1
Line(0 , 0) -(127 , 64) , 1                                 'make line
Wait 2
Line(0 , 0) -(127 , 64) , 0                                 'remove line

For Y = 1 To 20
   Circle(30 , 30) , Y , 1
   Waitms 100
Next

Wait 1
Glcdcmd &H3E , 1 : Glcdcmd &H3E , 2                         ' both displays off
Wait 1
Glcdcmd &H3F , 1 : Glcdcmd &H3F , 2                         'both on
'GLCDCMD accepts an additional param to select the chip
'With multiple, GLCDCMD statements, it is best to specify the chip only the first time


Showpic 0 , 0 , Plaatje                                     'show a comnpressed picture
End                                                         'end program


'we need to include the font files
'Notice that this is a testfont with only numbers defined !
'$include "smallfont8x8.font"
$include "font8x8.font"
'$include "font16x16.font"


Plaatje:
'include the picture data
$bgf "ks108.bgf"
Nun meine FRage, wie muss ich das Display anschließen?

Mit Config Graphlcd = 128 * 64sed , Dataport = Porta , Controlport = Portc , Ce = 0 , Ce2 = 1 , Cd = 4 , Rd = 3 , Reset = 2 , Enable = 5

Komm ich nicht so richtig zurecht mit. Wo wird welcher Pin angeschlossen und brauch das Display nun 9V und/oder 5V und an welchen Pin. Hab das Diagramm nicht richtig verstanden und mit der Suche bin ich auch noch nicht zum Ziel gekommen.

Ich hab wie es in der Demo steht einen Atmega 32

Bitte helft mir.